Home > News
Practice For Warehouse Storage And Quality Maintenance Of Textile Spinning Finis
[2026/11/20]  Read total of [9] times

Textile spinning finish is compound chemical auxiliary. Storage condition affects emulsion stability. Some production faults do not stem from formula defects, but from improper warehouse management. Good stock‑liquid storage serves as precondition for stable spinning production.


Warehouse shall be shaded, ventilated with steady indoor temperature, away from direct sunlight and heat source. High‑temperature environment accelerates oxidation of partial additives. Long‑term low‑temperature storage may trigger precipitation and stratification. Barrels shall be well‑sealed to minimize air contact and oxidation. Different grades shall be stacked separately with clear marks to avoid material mixing.


Visual inspection shall be conducted before stock‑liquid usage. Barrels with obvious stratification, sediment or abnormal discoloration shall be assessed before feeding into production. Long‑standing barrels need sufficient stirring to homogenize components and prevent sediment from entering dispensing system.


Avoid heavy impact during transportation to prevent barrel damage and leakage. Do not mix different batches directly inside storage drums. When switching to new batches, dispensing tank and pipelines are suggested to be rinsed to reduce cross‑influence. Complete receiving‑and‑issuing records shall be kept with batch number and incoming date. Follow first‑in‑first‑out rule to control storage cycle.


Sufficient technical communication between spinning mill and finish supplier on storage requirements lowers risks caused by stock‑liquid degradation and supports continuous spinning‑line operation.