- How to achieve revenue growth driven by policy dividend and technological revolution?
- Spin Oil: The Lubricant Enhancing Spinning Efficiency
- What are the components of spinning oil?
- The tariff problem has hit the shipping route from the Far East to the United States
- Spinning oil plays an important role in the filament production of chemical fiber!
- The year 2025 is the end of the 14th Five-Year Plan!

- Contact: Miss Tang
- Telephone: 0086-18926870629
- Email: taonano@taonanooil.com
- Address:No. 59, Liantang Road, Sanzhong Village, Qingxi Town, Dongguan City, Guangdong Province
Semi-synthetic cutting fluid TS-2001
Excellent defoaming and anti-rust properties, excellent cooling and lubrication properties; extended service life; good viscosity-temperature and fluidity, ensuring normal use in a wide temperature range; excellent friction reduction and extreme pressure properties , greatly reducing the friction resistance during cutting; suitable for difficult processing. Protect the tool, extend the service life of the tool, and reduce the cost of tool use. Has excellent cooling, lubrication, cleaning and rust resistance. With good stability and long service life, it is the best substitute for traditional emulsified oil.
Inquiry
Semi-synthetic cutting fluid:
Semi-synthetic cutting fluid performance characteristics:
Excellent defoaming and anti-rust properties, excellent cooling and lubrication properties; extended service life; good viscosity-temperature and fluidity, ensuring normal use in a wide temperature range; excellent friction reduction and extreme pressure properties , greatly reducing the friction resistance during cutting; suitable for difficult processing. Protect the tool, extend the service life of the tool, and reduce the cost of tool use. Has excellent cooling, lubrication, cleaning and rust resistance. With good stability and long service life, it is the best substitute for traditional emulsified oil.
Semi-synthetic cutting fluid related data:
Semi-synthetic cutting fluid PH value: 7.2-9.5
Semi-synthetic cutting fluid density: 0.985-1.125
Average friction coefficient of semi-synthetic cutting fluid: 0.347
Average wear scar diameter of semi-synthetic cutting fluid (mm): 0.148
Semi-synthetic cutting fluid is suitable for cooling and lubrication in cutting and grinding processes such as aluminum, iron, ordinary steel, and bearing steel.
-
Miss Tang
-
0086-18926870629
-
taonano@taonanooil.com
-
No. 59, Liantang Road, Sanzhong Village, Qingxi Town, Dongguan City, Guangdong Province